Sapa Facade 4150 The 4150 facade system consists of 50 mm wide insulated aluminium profiles. The design of the inside gasket and the thermal break optimises the insulation of the profiles.
The profiles are available in a number of different depths. They are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints. The system can be easily complemented with opening units. The U value of a facade must be calculated for the entire facade, see the right hand menu. - Well-insulated profiles
- Several types of mullion and transom profiles. Rectangular (profile depth 35-300 mm), I- and T-shaped profiles give a lot of freedom in interior design
- Wide range of decorative caps for exterior design
- Four window systems, both inward and outward opening
- Doors Hinge type and sliding doors can be easily integrated
- Fire protection Available in fire resistance class E 30, EI 15 or EI 30
- Classified According to applicable EN standards
| | |
Sapa Facade 4150 SX
The 4150 SX facade system consists of 50 mm wide insulated aluminium profiles. Our newly developed insulating thermal break together with the inside gasket, provides good insulation capacity (so-called High Insulated).
The mullions are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints. The system can be easily complemented with opening units. The U value of a facade must be calculated for the entire facade, see the right hand menu. - High insulated profiles
- Several types of mullion and transoms. Rectangular (profile depth 35-300 mm), I- and T-shaped profiles give a lot of freedom in interior design.
- Wide range of decorative caps for exterior design.
- Windows Hinge type and sliding doors can be easily integrated.
- Doors Hinge type and sliding doors can be easily integrated.
- Classified According to applicable EN standards.
| | |
Sapa Facade 4150 SSG Structural Glazing
The 4150 SSG Structural Glazing facade system consists of 50 mm wide insulated aluminium mullions and transoms. The system is based on double glazing units with a warm edge and a specially developed mounting profile for installation fittings. The glass panes are anchored in the mullions and transoms with the help of installation fittings. The weather seal between the glass panes is done with the use of an approved sealing compound, usually black. The design of the inside gasket and the insulating strip optimises the insulation of the profiles.
The mullions are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints. The system also includes opening units, which can be easily integrated. The U value of a facade must be calculated for the entire facade, see the right hand menu. - Well-insulated profiles
- Several mullions and transoms Rectangular (profile depth 35-300 mm), I- and T-shaped profiles give a lot of freedom in interior design
- Opening window with hidden sash
- Doors Hinge type and sliding doors can be easily be integrated.
- Classified According to applicable EN standards
| | |
Sapa Facade 5050 SG System Glazing
The 5050 SG System Glazing facade system consists of 50 mm wide insulated aluminium profiles. The external glass holders are only 32 mm wide, while the internal framework profiles are 50 mm wide. The external glass holders are best installed with countersunk screws, which can be hidden with covers. Rebate for double glazing units with standard sealing.
The profiles are designed so as to ensure stability under the dimensioning loads. The system can be easily complemented with opening units. The U value of a facade must be reported for the entire facade, see the right hand menu. - Well-insulated profiles
- Framework profiles Rectangular, profile depth 60-180 mm
- Opening windows with hidden sash
- Doors Hinge type and sliding doors can be easily connected
- Classified According to applicable EN standards
| | |
Sapa Glazed Elements 3074
The 3074 glazed elements system consists of 74-138 mm deep insulated aluminium profiles. Glazing is done from the inside with the use of glazing beads. The outside and inside gaskets have straight edges for optimum clear dimensions. The 3074 system elements are also available with extra high insulation capacity and are then designated as 3074 TX.
The profiles are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints. The U value of a facade must be calculated for the entire facade, see the right hand menu. - Well insulated profiles.
- Framework profiles. Profile depth 74-138 mm,
profile width 52-224 mm. - Opening windowsEasily integrated.
- DoorsHinge type and sliding doors can be easily integrated.
- Classified. According to applicable EN standards.
| | |
Sapa Glazed Elements 3050, interior
The 3050 glazed elements system consists of 50 mm deep uninsulated aluminium profiles. Glazing is done from the inside with the use of glazing beads.
The profiles are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints. - Framework profiles. Profile depth 50-120 mm, profile width 52-250 mm.
- Opening windows. Easily integrated.
- Doors. Hinge type and sliding doors can be easily integrated.
| | |
.jpg)
.jpg)
